



Victron MultiPlus-II 12/3000/120-32 230V
MultiPlus-II 12/3000/120-32 - Inverter/Charger
- Combination of inverter and charger
- Pure sine wave 230 V AC
- Two AC outputs
- PowerControl and PowerAssist functions
- Parallel and three-phase operation possible
Tax included. Shipping calculated at checkout
Your legal guarantee rights

Product description
Victron MuliPlus-II 12/3000/120-32 230V
PowerControl and PowerAssist – Increase in mains or generator power
A maximum mains or generator current can be set. The MultiPlus-II then takes other connected AC consumers into account and uses only the remaining current to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). With the PowerAssist function, the PowerControl principle takes on a new dimension. Load peaks often occur only for a limited period. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power, or mains power using energy from the battery. When the load is reduced, i.e., consumers are switched off, the now again sufficiently available energy can be used to charge the batteries.
Solar power: AC power even during a power outage
The MultiPlus-II can be used with both off-grid and grid-connected PV systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.
Two AC outputs
The main output ensures uninterrupted operation. In the event of a power outage or interruption of shore / generator power, the MultiPlus-II takes over the supply of the connected consumers. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC power is available at the input of the MultiPlus-II. Consumers that are not allowed to discharge the battery, such as a water heater, can be connected to this output.
System configuration, monitoring and control on site
The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3-USB interface are required for this). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.
| Technical data | MultiPlus-II 12/3000 |
| Transfer switch | 32 A |
| Max. DC input voltage range | 9.5-17 V |
| Cont. output power at 25 °C | 2400 W |
| Peak power | 5500 W |
| Max. efficiency | 93% |
| Max. battery charging current | 120 A |
| Operating temperature | - 40 °C to + 65 °C |
| Weight | approx. 19 kg |
| Dimensions | 546 mm x 275 mm x 147 mm |
Product details & downloads
Manufacturer information and, if applicable, the responsible person:
Victron Energy
De Paal 35
1351 JG Almere
Email: sales@victronenergy.com
Website: https://www.victronenergy.com

Advice & Contact
Questions about the article?
If you have any further questions about the product or would like to contact us in general, please click the button and send us a message. We look forward to hearing from you!
GET ADVICE NOW




